In laundry plants, only the lifting of bags needs to be completed by electricity, and the other operations are completed by the height and height of the track, relying on gravity and inertia. The front hanging bag containing the linen is nearly 100 kilograms, and the rear hanging bag is more than 120 kilograms. These hanging bags run back and forth on the track for a long time, so the quality requirements for supporting electrical, pneumatic, track, pulley, and other parts are very high.
Potential Problems Resulted by Bad Accessories
If the basic material of the track wheel is not good and the track accuracy is slightly deviated, the bag will be stuck in the air and cannot walk. If there is wear between the wheel and the track, the running resistance will increase so that the bag can not slide smoothly, and even get stuck in mid-air. It will lead to a decrease in the operating efficiency of the entire plant. Therefore, the track and wheels must be made of special materials with a special process. It should be sensitive, wear-resistant, and durable, ensuring long-term smooth operation.
Cost Control Practices by Some Manufacturers
In order to control costs, many laundry equipment manufacturers use rubber bag rollers and carbon steel tracks. Rubber wheel resistance is large and easy to wear. Carbon steel is easy to rust and corrode. In order to make the carbon steel track smooth and not rust, it is necessary to add grease on the track during the use of the process, which is not only troublesome, but also easy to adhere to plush and dust in the laundry plant, increasing the resistance between the wheel and the track, and gradually causing the hanging bag to run smoothly.
CLM Solutions
● CLM hanging bag system has been carefully selected in material and roller. The overall track is made of 304 stainless steel. The front hanging bag roller is made of stainless steel, and the rear hanging bag is made of imported custom rollers. Both smooth and wear resistance can meet the requirements of the front and rear hanging bags.
● In addition, a hanging bag system runs on the high-altitude track. The walking, stopping, orbit changing, rising, falling, feeding, etc., are controlled by photoelectric detection and induction and the action of the cylinder. There are hundreds of optical sensors and pneumatic controls. The quality and stability of each part are very important, so we must pay attention to the quality of each part when purchasing the bag. If there is a problem with the hanging bag in the air, it will not only be difficult to maintain but also stop the production of the entire laundry plant, so we must have an in-depth understanding.
Post time: Dec-18-2024