• head_banner_01

news

Tunnel Washer vs. Industrial Washer: Five Key Factors Affecting Cleaning Performance

In the laundry industry, some laundry plant operators consider that tunnel washers deliver lower cleaning performance than industrial washers. In reality, they lack a systematic comparison of the two washing methods. They may also draw conclusions based on single indicators, such as load size and water level. Basic washing factors should be considered when evaluating linen washing quality. Generally, linen washing quality depends on five key factors (water, temperature, chemicals, washing time, and mechanical action). This article will compare the washing conditions between tunnel washers and industrial washers across these five dimensions.

Water Volume and Load Size

Laundry plants often use treated soft water. The difference lies in the control of water consumption and load size during laundry processes. Tunnel washers use a standardized washing process. Linens need to pass through the weighing platform before entering the system. The laundry load per batch is relatively fixed. Water is added according to standardized ratios. Kingstar tunnel washers feature a low-water-level design during the main wash. This saves chemicals and improves mechanical action. Friction between linens is increased. This helps remove stains.

The load size of industrial washers relies on operators. During actual production, overloading and underloading usually occur. Inconsistent load sizes can cause excessive or insufficient water volume. This further affects water-to-chemical ratios, mechanical action, and chemical concentration. Finally, this affects linen washing quality.

Washing Temperature

During the main wash, the washing temperature often needs to reach 75℃ to 80℃. This helps laundry chemicals perform at their best. Kingstar tunnel washers are equipped with an insulated main-wash compartment design. This can reduce heat loss. Thus, the main-wash temperature can be maintained relatively stable in the required temperature range. Industrial washers’ cylinders often have no thermal insulation treatment. During laundry processes, temperature fluctuations are relatively significant. This may affect cleaning performance.

Chemical Dosage

For a tunnel washer, laundry load per batch is relatively fixed. Chemicals are dosed according to standardized ratios. This ensures higher consistency between batches. However, chemicals are dosed manually or via peristaltic pumps in industrial washers. During manual dosing, chemical dosage is judged by operators. This is less standardized. It heavily relies on labor. When dosing chemicals via peristaltic pumps, the chemical dosage per batch is fixed. But the linen laundry load per batch is different. Thus, excessive or insufficient chemical dosage may still occur. Inconsistent chemical concentration directly affects cleaning performance and leaves residues on linen.

Washing Time

For a tunnel washer, processing time (pre-wash, main wash, rinsing) is fixed. Laundry processes are standardized. During operations, it requires no manual intervention. An industrial washer has a relatively low washing efficiency. To meet the production schedule, some workers may shorten washing time. This can affect chemical reaction, stain removal, and rinsing performance. It may also have a negative impact on linen washing quality.

Mechanical Action

During washing, mechanical action is related to the inner drum rotation angle, frequency, and linen drop angle during tumbling. Kingstar tunnel washer uses a 235° rotation angle. Its rotation frequency is 11 times per minute. Starting from the second compartment, the loading ratio is 1:32. But a standalone machine’s is 1:10. In addition, the tunnel washer has a larger inner drum diameter, with a stronger tumbling action. This is more beneficial for stain removal. In cleaning performance, sufficient and consistent mechanical action is critical for tunnel washers.

Additional Design

In addition to the above five key factors, the Kingstar tunnel washer also uses multiple designs targeted at cleaning performance. Two lifting ribs are installed on the inner drum surface. This increases friction during laundry processes and improves linen washing quality. The rinsing compartment uses a counter-current rinsing and dual-compartment design. Water circulates externally, preventing clean and dirty water from mixing between different compartments. The water tank is equipped with a lint filtration system. This helps effectively filter impurities (such as lint). It can also reduce secondary contamination on the linen. Meanwhile, the Kingstar tunnel washer uses an efficient overflow design. It can discharge impurities and foam floating on the water. This further improves linen washing quality. Traditional standalone machines do not have these designs.

Conclusion

Considering the above five key factors (water, temperature, chemicals, washing time, and mechanical action), the tunnel washer significantly improves washing consistency and controllability through weighing before loading, standardized water-to-chemical ratio, low water level during main wash, insulated main wash compartments, standardized chemical dosing, consistent laundry processes, and stronger mechanical action. For linen with similar soil levels, tunnel washers have greater advantages in cleaning performance.

Some laundry operators may think that tunnel washers deliver lower cleaning performance than industrial washers. This is because they lack a systematic comparison of their laundry processes. When evaluating laundry equipment, focus on whether it can consistently control the five key washing factors, not on whether it is a standalone machine or a tunnel washer.

Q&A

Q1: What is the counter-current rinsing of the Kingstar tunnel washer?

A1: The counter-current rinsing uses an external circulation design. External series-connected piping is installed at the bottom of the rinsing compartment. Fresh water enters from the last rinsing compartment. It circulates forward through the compartments in sequence. Water inside the front compartments cannot flow into the back compartments. This can ensure rinsing quality.

Q2: How is the Kingstar tunnel washer’s water reuse tank designed?

A2: The water reuse tank collects water from rinsing, neutralization, and press extractors. Three different water reuse tanks are required. Rinse water is reused for the main wash. Neutralization and press extractor water is mainly reused for pre-wash.

Q3: What is the daily laundry capacity of a laundry plant when considering using a tunnel washer?

A3: It depends on multiple factors (such as the laundry plant’s expected working hours, local labor costs, and local laundry markets). If you are planning to upgrade an existing laundry plant or build a new facility, contact us for a detailed solution.


Post time: Nov-19-2026

    INQUIRY NOW