Products
SHS-2040/2060kg Automatic Washer Extractor of Industry
Applicable Industry:
Details Display
Control System
KingStar washer extractor control system can realize main programs such as automatic water addition, pre-wash, main wash, rinsing, neutralization, etc. There are 30 sets of washing programs to choose from, and 5 sets of common automatic washing programs are available.
3-Color Indicator Lights
The washer extractor adopts the design of 3-color indicator lights, which can warn the operator during operation, normal, finish washing, and fault warning.
Intelligent Weighing System
Kingstar washer extractor equipped with the "intelligent weighing system" , according to the actual weight of the linen, add water and detergent according to the proportion, and the corresponding steam can save the cost of water, electricity, steam and detergent, but also ensure the stability of washing quality.
Automatic Washer Extractor Add Detergents
The design of large-diameter water inlet, automatic feeding system and optional double drainage can help you shorten the washing time, improve the efficiency and reduce the cost.
Branded Import Inverter
Electric components are imported brands. The inverter is Mitsubishi brand in Japan and all contactors are Schneider from France, all wires, plugins, bearing, etc. are imported brands.
Washer Extractor Inner Drum
The inner and outer drums of the washer extractor and the parts in contact with water are all made of SUS304 stainless steel to ensure that the washer extractor will never rust, and there will be no washing quality accidents caused by the rusting of the washer extractor.
Industrial Washer Extractor Shock Mitigation System
The washer extractor adopts down suspended shock absorption design, inner and outer double -layer seat springs&rubber shock absorption springs and machine feet rubber shock absorption and four damping shock absorption structure design, ultra -low vibration, shock absorption rate can reach 98%. Without ground base, can be used on any floor.
KingStar washer extractor rippical diameter of the main axis reaches 160mm, imported rolling bearings and oil seals, which can ensure that it does not need to replace the bearing oil seal for 5 years.
The strength design of the KingStar washer extractor, the design of the transmission system, and the configuration of the high-quality inverter all revolved around the super extraction capacity of 400G. The drying time was shortened, while the daily output was increased, the consumption of drying steam was reduced, and the cost of steam consumption was greatly saved.
KingStar washer extractor belt polly is made of the high-grade aluminum alloy material and is a whole integrated die-casting structure, which effectively guarantees the assembly accuracy of the main axis. It has good anti-rust, anticorrosive, and anti-knock effects, and durable.
KingStar washer extractor large size stainless steel loading door design, saving time and effort to load clothing, electronic door locks are controlled by computer program, and the door only can be opened after high speed extraction, which can effectively avoid personal safety accidents.
The linen feeding port of this washer extractor is processed by a special machine. The mouth surface at the junction of the inner drum and the outer drum is all designed with a crimping mouth with 270 degrees, surface is smooth, strength is high and the gap is small, so as to avoid the damage of linen.
Technical Parameter
|
Model |
SHS-2100 |
SHS-2060 |
SHS-2040 |
Standard |
SHS-2100 |
SHS-2060 |
SHS-2040 |
|
Voltage(V) |
380 |
380 |
380 |
Steam Pipe(mm) |
DN25 |
DN25 |
DN25 |
|
Capacity(kg) |
100 |
60 |
40 |
Water Inlet Pipe(mm) |
DN50 |
DN40 |
DN40 |
|
Volume(L) |
1000 |
600 |
400 |
Hot Water Pipe(mm) |
DN50 |
DN40 |
DN40 |
|
Max Speed(rpm) |
745 |
815 |
935 |
Drain Pipe(mm) |
DN110 |
DN110 |
DN110 |
|
Power(kw) |
15 |
7.5 |
5.5 |
Drum Diameter(mm) |
1310 |
1080 |
900 |
|
Steam Pressure(MPa) |
0.4～0.6 |
0.4～0.6 |
0.4～0.6 |
Drum Deepth(mm) |
750 |
680 |
660 |
|
Water Inlet Pressure(MPa) |
0.2 ～0.4 |
0.2 ～0.4 |
0.2～0.4 |
Weight(kg) |
3260 |
2600 |
2200 |
|
Noise(db) |
≤70 |
≤70 |
≤70 |
Dimension |
1815×2090×2390 |
1702×1538×2025 |
1650×1360×1780 |
|
G Factor(G) |
400 |
400 |
400 |
